Discuss Your Project | myriadlysells@gmail.com | +91 8120000323 / +91 8120000326

STORAGE VESSEL-500L-SS316

This tanks are used for storage of Liquids, Gases etc which has high Pressures. These tanks can be provided with Lugs, Legs or Skirt Supports & Saddle Supports for Horizontal Mounted Tanks.

Go to Compare >> Call Now Click Here

Call Now: +91 8120000323 / +91 8120000326


  • Product Description
  • product Specification
  • product Docs

This tanks are used for storage of Liquids, Gases etc which has high Pressures. These tanks can be provided with Lugs, Legs or Skirt Supports & Saddle Supports for Horizontal Mounted Tanks.

These tanks are largely used for storing in process solvent and as a day tank in pharma industry. 180 Grit, 240 Grit or Mirror finish can be provided as per customer requirement.

Product Storage Vessel-500L-SS316
Capacity 500L
DESIGN CODES AND STANDARD fgdfg
Pipe ASME 31.3B
Flanges ANSI 16.5 150#
PROCESS PARAMTER
Particular Shell Limpet/Jacket
Design Pressure 3 Kg/cm2 - FV NA
Design Temperature -20 to 150 Deg C NA
Test Pressure 3.9 Kg/cm2 - FV NA
DIMENSIONAL DATA OF REACTOR/AGITATED VESSEL
Particular Shell Limpet/Jacket
Orientation Horizontal/Vertical Vertical NA
Vessel Volume 550L NA
Inner Diameter 800mm NA
TAN To TAN Height of shell 1000mm NA
Baffles Length NA NA
Shell Thickness 4mm NA
Top/Bottom Dish Thickness 5mm NA
Baffle Thickness NA NA
DIMENSIONAL DATA OF AGITATOR
Particular Shell Limpet/Jacket
Type of impeller NA NA
No. of Impeller NA NA
Agitator RPM NA NA
Shaft Type NA NA
Shaft Diameter NA NA
DRIVING DATA
Particular Shell Limpet/Jacket
Gear Box Type NA NA
Gear Box Make NA NA
Make of Bearing NA NA
Make of Coupling NA NA
Mechanical Seal Face NA NA
No. of Mechanical Seal NA NA
O Ring NA NA
Motor HP NA NA
Make of Motor NA NA
Motor Type NA NA
MOC AND OTHER ACCESSORIES DISCRIPTION
Particular Shell Limpet/Jacket
Shell,Top Dish, Bottom Dish, Manhole, Dip Pip/J Bend, Internal Nut Bolt, Bottom Outlet Flange, Nozzles SS316 NA
Agitator Mounting Pad NA NA
Lug Support 04 nos ISMC 100 as per required length NA
Lantern Support NA NA
External Nut Bolts SS04 NA
Supporting Ring, Nuts for insulation NA NA
Gaskets for Nozzles NA NA
Gaskets for Manhole Sight Glass and Light Glass CAF CAF
Guard box for Shaft-Motor and Gear Box NA NA
Name Plate SS304 NA
Earthing Boss 2 NO. SS304 NA
Flush Bottom Valve NA NA
Flush Bottom Valve make NA NA
Lifting Hooks 2 No. SS304 NA
Insulation Protection Ring NA NA
Hot and Cold Insulation with 3mm SS 304 cladding NA NA
Monky Ladder with Cage NA NA
Top Railling with Toe guard NA NA
FINISHING
Particular Shell Limpet/Jacket
Internal Surface Finish of Reactor 240 Grit NA
Outer Surface Finish of Reactor 180 Grit NA
MS Surfaces 2 Coats of Primer NA
Hallar Line Coating Internal NA NA
Hallar Line Coating External NA NA
RADIOGRAPHY
Particular Shell Limpet/Jacket
Radiography 100% on Shell and 10% + All 'T' on shell NA
CORROSION ALLOWENCES
Particular Shell Limpet/Jacket
Corrosion Allowences 0.85 NA
TESTING
Particular Shell Limpet/Jacket
Testing Hydraulic Test NA
DOCUMENTS
Particular Shell Limpet/Jacket
Documents All MOC, Radiography, Hydraulic Test , GA drawing & Certificates will be provided NA
NOZZLE SIZES
Particular Shell Limpet/Jacket
N1 As per requirement during drawing approval NA
N2 As per requirement during drawing approval NA
N3 As per requirement during drawing approval NA
N4 As per requirement during drawing approval NA
N5 As per requirement during drawing approval NA
N6 As per requirement during drawing approval NA
N7 As per requirement during drawing approval NA
N8 As per requirement during drawing approval NA
N9 As per requirement during drawing approval NA
N10 As per requirement during drawing approval NA